Effect of melting temperature on zamak die casting

     The best melting temperature on zamak die casting: the melting point of zinc alloy for die casting is 382 ~ 386 °C, and the suitable temperature and low temperature control is an important factor for the zinc alloy composition control. In order to ensure the liquid alloy with good liquidity, zinc pot temperature of molten metal is 415 ~ 430 °C, thin wall and complex die casting temperature desirable upper limit; wall thickness and a simple desirable lower limit value. The temperature of metal liquid in the central smelting furnace is 430 ~ 450 °C. Enter the gooseneck liquid metal temperature and the temperature is almost the same as the zinc pot. By controlling the temperature of the zinc pot, the casting temperature can be accurately controlled.

    When the melting temperature is too low, the flow property of the alloy is poor, which is not conducive to the formation, which affects the surface quality of the zamak die casting.

    The melting temperature is too high, the reaction of iron crucible and zinc liquid is accelerated, the crucible surface oxidation reaction to produce Fe2O3 and other oxides; iron element also reacts with zinc to produce FeZn13 (zinc dross), and dissolved in the zinc solution. The aluminum and the magnesium element burning loss, the metal oxidation rate speeds up, the burning loss quantity increases, zinc dross increase. Thermal expansion occurs card die hammer phenomenon. The iron element in cast iron crucible is more and more, and the reaction of zinc and iron at high temperature is accelerated. Hard particles can form Fe Al compounds, causes the hammer head and the goose neck excessive wear. The iron element in cast iron crucible is more and more, and the reaction of zinc and iron at high temperature is accelerated. Hard particles can form Fe Al intermetallic compounds, the hammer, gooseneck excessive wear. Fuel consumption increases accordingly. The higher the temperature, the casting crystallization is greater and reduce the mechanical performance.

The above article from KENOS official website, reproduced please specify. kenosblog1603

Development trend of magnesium die casting for auto parts

    Because magnesium alloy has a series of advantages such as low density, high strength and stiffness, good anti corrosion and anti electromagnetic radiation ability, good filling performance and renewable utilization, it is more and more application in automobile, electronics, home appliances, communications, instrumentation and aerospace, etc..
    The application of magnesium die casting for auto parts in the developed countries has continued to grow rapidly, such as Europe, America, Japan, etc.. According to the International Magnesium Association (IMA) estimates, with the development of the world automobile industry, the demand for magnesium alloy die casting will continue to grow. It is estimated that by 2030 the world's total car will be more than double, reaching one billion. In the next 10 years, the demand for magnesium in the automotive industry will increase by 15%.
    Into twenty-first Century, magnesium die casting for auto parts will become the most important application areas of magnesium. The developed countries in Europe and the United States of automobile light weight, less fuel consumption, meet the environmental requirements of the rapid growth of magnesium die casting. In addition, magnesium alloy die castings can also improve the structure and dynamic performance of the car. which is also one of the reasons for the automotive industry to pay attention to magnesium alloy.

The above article from KENOS official website, reproduced please specify. kenosblog1603

The problem faced by die casting manufacturer in China

   At present, the problem faced by die casting manufacturer in China are as follows:
   First, the contradiction between the internationalization of the die casting Market and the quality of the enterprise. The world non-ferrous casting production core shifts to China. However, due to the level of the die casting process, the technical equipment and the quality of the enterprises have a gap compared with the international advanced level, need to have a process to improve and perfect. At present, the export of die-casting products to middle and low priority, especially in the low-grade. We should actively improve the quality of enterprises, enhance the technical capacity, increase the added value, to achieve industrial restructuring, and gradually developed into a modern die casting industry.
   Second, the rapid development of die casting manufacturer and ecological environment. Die casting enterprise development is very uneven, some of the enterprise's environmental protection and labor health care is better; but some of the production conditions are very poor, environmental pollution is serious. Pay attention to the ecological environment, caring for the health of workers, strengthen environmental management, to improve the labor health, rigorously enforce the clean production, the development of circular economy. This is the only way that China die casting manufacturer sustainable development.
   Third, the contradiction between the cost of the enterprise and the profit space narrowing. Because of rising material prices, the casting price drops, the cost of labor increases, factors and so on environmental protection investment increase, the profit space reduces day by day, this brings the huge pressure for the die casting manufacturer.

The above article from KENOS official website, reproduced please specify. kenosblog1603

Why does zinc die casting have porosity

    Zinc die casting have porosity is often related to raw materials or smelting process.
    The main component of the gas is hydrogen in liquid zinc, which accounts for about 85% of the total amount of gas. Melting temperature is higher, the solubility of hydrogen in liquid zinc is higher, but the solubility of hydrogen in solid zinc is very low, so the formation of hydrogen in the solidification process is the porosity.
Source of hydrogen: water vapor in the atmosphere, liquid metal absorbed from the moist air. Zinc die casting raw material itself contains hydrogen, alloy ingot surface is moist, recycled scrap is dirty and greasy. The tools and flux is moist.

The above article from KENOS official website, reproduced please specify. kenosblog1603

The flow mark of aluminum die casting

    Characteristics: on the casting surface has with the molten metal flow direction consistent stripe. Stripe and metal matrix color is not the same and no direction, no development trend.
    How does the flow mark of aluminum die casting be formed?
    First, the molten metal into the cavity to form a very thin and incomplete metal layer, afterwards comes in the molten metal to make up for it and formed flow mark; mold temperature is too low and uneven; the ingate sectional area is too small and improper location result liquid metal spray; the pressure on the liquid metal is insufficient; coating dosage is too much.
    Processing method:
    Improve the temperature of a molten metal to 620 ~ 650 °C; improve the aluminum die casting mold temperature, maintained at a temperature of 200 ~ 250 °C; increase the ingate sectional area and change the inlet position; adjustment of the filling velocity and injection time and the length of the flow channel; selection suitable coating and adjust dosage.

The above article from KENOS official website, reproduced please specify. kenosblog1603