The reason of die casting mold making forming the stripe:
At the front end of the liquid metal temperature is too low, meet incomplete fusion, a mark.
The improvement of method:
Check the wall thickness whether too thin (design and manufacturing), the thin area should be directly filling.
Check the shape whether easy to filling; distance is too far, enclosed area (such as fin, convex), blocked the area, fillet region is too small and so are not easily filling. And pay attention to whether there is a rib point or cold spots.
Shorten the filling time.
Change the filling way of die casting mold making.
Increase mold temperature
Raise the temperature of molten metal.
Check the composition of the alloy.
Increasing the exhaust passage or add vacuum device, reduce the filling resistance.
xinniukenosbk
The above article from KENOS official website (http://www.kenos-diecasting.com/)
The original address: http://www.kenos-diecasting.com/news_show_62.html, reproduced please specify
At the front end of the liquid metal temperature is too low, meet incomplete fusion, a mark.
The improvement of method:
Check the wall thickness whether too thin (design and manufacturing), the thin area should be directly filling.
Check the shape whether easy to filling; distance is too far, enclosed area (such as fin, convex), blocked the area, fillet region is too small and so are not easily filling. And pay attention to whether there is a rib point or cold spots.
Shorten the filling time.
Change the filling way of die casting mold making.
Increase mold temperature
Raise the temperature of molten metal.
Check the composition of the alloy.
Increasing the exhaust passage or add vacuum device, reduce the filling resistance.
xinniukenosbk
The above article from KENOS official website (http://www.kenos-diecasting.com/)
The original address: http://www.kenos-diecasting.com/news_show_62.html, reproduced please specify
没有评论:
发表评论