Die cast zinc alloy properties: mechanical properties of zinc alloy and electroplating properties are very good. The surface of zinc alloy die castings of roughness, strength and elongation are very good. Due to the mobility of zinc is so good can do thin products (wall thickness can be 0.5). Defects of zinc is the largest proportion is too large, the weight and the cost of the product is high, suitable for small products. At the same time, zinc alloy poor dimensional stability.
1) Specific gravity: pure zinc: 6.6g / cm3; die-cast zinc alloy: 6.7-6.9g / cm3;
2) Melting point: pure zinc: 419 °C; zinc alloy: 387-390 °C; Die Casting temperature: 390-410 °C.
3) Zinc die casting type most commonly used is 3 # zinc alloy (ZAMAK 3).
The above article from KENOS official website (http://www.kenos-diecasting.com/)
The original address: http://www.kenos-diecasting.com/news_show_66.html, reproduced please specify. kenosblog1504
1) Specific gravity: pure zinc: 6.6g / cm3; die-cast zinc alloy: 6.7-6.9g / cm3;
2) Melting point: pure zinc: 419 °C; zinc alloy: 387-390 °C; Die Casting temperature: 390-410 °C.
3) Zinc die casting type most commonly used is 3 # zinc alloy (ZAMAK 3).
The above article from KENOS official website (http://www.kenos-diecasting.com/)
The original address: http://www.kenos-diecasting.com/news_show_66.html, reproduced please specify. kenosblog1504
没有评论:
发表评论