Metal stamping parts is very widely used product in our daily life. With the development of science and technology, people more and more high request of hardware stamping parts. Especially in terms of quality and technology requirements are very high.
The bending type metal stamping parts requirements:
Bending shape should be symmetrical, the bending radius of not less than the allowable minimum bending radius.
If parts have hole, to avoid hole deformation when bending.
Curved edge is too short not easy forming, then the straight part of the bending edge H>2δ. If the requirements of H is very short, the need to set aside appropriate allowance to increase H, cut away the excess metal after bending.
Metal stamping parts quality requirements are very strict, so the metal stamping parts supplier must strictly control the shape and size of stamping parts.
The above article from KENOS official website (http://www.kenos-diecasting.com/)
The original address: http://www.kenos-diecasting.com/news_show_81.html, reproduced please specify. kenosblog1506
The bending type metal stamping parts requirements:
Bending shape should be symmetrical, the bending radius of not less than the allowable minimum bending radius.
If parts have hole, to avoid hole deformation when bending.
Curved edge is too short not easy forming, then the straight part of the bending edge H>2δ. If the requirements of H is very short, the need to set aside appropriate allowance to increase H, cut away the excess metal after bending.
Metal stamping parts quality requirements are very strict, so the metal stamping parts supplier must strictly control the shape and size of stamping parts.
The above article from KENOS official website (http://www.kenos-diecasting.com/)
The original address: http://www.kenos-diecasting.com/news_show_81.html, reproduced please specify. kenosblog1506
没有评论:
发表评论