The general production process of metal stamping mould:
1. Prepares materials. According to the need to buy mold steel materials.
2. Rough machining. Processes the plane and the side with the milling machine. The processing objects have the clamping plank, stripper plate, the lower template and the backing strip, the ledger wall, upper cover plate and pushing plate and so on.
3. Fine processing. Machining plane and right angle with the grinding machine. Grinding the plane of the clamping plank, stripper plate, the lower template and the backing strip, then grinding right angle, then grinding the plane of the bottom and upper cover plate.
4. Scribing. According to the metal stamping mould production drawings to grind a good mold plate placed on the surface plate, carries on the lineation with the height calipers. Then carries on the drill hole and tapping to the mold plate.
5. Heat treatment. Heat treatment is needed to improve the hardness of the lower template and module.
6. Finishing. Once again grinding after heat-treatment of the panel of the plane and play a right angle, and then the line cutting.
7. Assembly mould. Selection of mold or supporting the guide column and a guide sleeve to assembly mold.
8. Test mould. Will complete the mold is installed on the metal stamping machine tool to carry on the debugging, then carries on the ramming and surveys the ramming components the size to confirm whether it does conform to the product requirement.
The above article from KENOS official website (http://www.kenos-diecasting.com/) kenosblog1511
The original address: http://www.kenos-diecasting.com/news_show_121.html, reproduced please specify.
1. Prepares materials. According to the need to buy mold steel materials.
2. Rough machining. Processes the plane and the side with the milling machine. The processing objects have the clamping plank, stripper plate, the lower template and the backing strip, the ledger wall, upper cover plate and pushing plate and so on.
3. Fine processing. Machining plane and right angle with the grinding machine. Grinding the plane of the clamping plank, stripper plate, the lower template and the backing strip, then grinding right angle, then grinding the plane of the bottom and upper cover plate.
4. Scribing. According to the metal stamping mould production drawings to grind a good mold plate placed on the surface plate, carries on the lineation with the height calipers. Then carries on the drill hole and tapping to the mold plate.
5. Heat treatment. Heat treatment is needed to improve the hardness of the lower template and module.
6. Finishing. Once again grinding after heat-treatment of the panel of the plane and play a right angle, and then the line cutting.
7. Assembly mould. Selection of mold or supporting the guide column and a guide sleeve to assembly mold.
8. Test mould. Will complete the mold is installed on the metal stamping machine tool to carry on the debugging, then carries on the ramming and surveys the ramming components the size to confirm whether it does conform to the product requirement.
The above article from KENOS official website (http://www.kenos-diecasting.com/) kenosblog1511
The original address: http://www.kenos-diecasting.com/news_show_121.html, reproduced please specify.
没有评论:
发表评论