Magnesium alloy die casting production safety precautions

     In the process of magnesium alloy die casting production, the most important thing is to keep the site clean, dry. Each boot should be preheated to 150 degrees above the mold, do not spray too much paint spraying, so as to avoid cavity seeper, cause danger. Try not to use cold water to cool down the punch and mould. The punch can use air-cooled, heating and cooling mold generally using high temperature resistant oil. Magnesium alloy die casting punch speed is faster than aluminum alloy die casting, to avoid flying material wounding, sometimes in the die parting face with a flying material baffle, die casting and safety doors must be closed, the operator stand in the parting surface is forbidden. Waste production site must be cleared up, can be placed in a dry non-combustible container. Fly ash and dust also to clean up. From the fire accident around the magnesium die casting the actual occurrence of the factory, more than 50% by the processing of magnesium dust, waste such as cleaning and storage problems caused, some occurred in the processing process, resulting in melting link accidents accounted for about 10%.

The above article from KENOS official website (http://www.kenos-diecasting.com/)
The original address: http://www.kenos-diecasting.com/news_show_94.html, reproduced please specify. kenosblog1507