The principle of aluminum die casting process

     The principle of aluminum die casting process is the liquid metal quickly into the precision metal mold cavity by high pressure, the liquid metal solidification under pressure and the formation of castings. Cold chamber die casting and hot chamber die casting are the two basic ways of die casting process.  In the cold chamber die casting, molten metal into the pressure chamber by manual pouring device or automatic pouring device, then the plunger forward, the molten metal into the cavity. In the hot chamber aluminum die casting, pressure chamber perpendicular to the crucible, the molten metal automatically flows into the pressure chamber by the pressure chamber inlet. Plunger downward movement, push the molten metal into the cavity through the gooseneck. The molten metal is solidified, open die casting mould, remove the castings, the completion of a die casting cycle.

The above article from KENOS official website (http://www.kenos-diecasting.com/)
The original address: http://www.kenos-diecasting.com/news_show_95.html, reproduced please specify. kenosblog1507