Zinc die casting production parameters and requirements

    The zinc die casting production generally used hot chamber die casting machine, its production parameters and requirements are as follows:
1. The furnace temperature: production, set to 410 °C to 430 °C;
2. Gooseneck temperature: production, set to 380 °C to 420 °C;
3. The nozzle temperature: set at between 400 °C to 440 °C production;
4. The hammer head and material pot coordination: playing material without stacker;
5. Fever cake: heat at the contact with the plane cake feeding pot agreement, no distortion, no alloy material adhesion, corrosion;
6. fever sets: surface clean and free of corrosion;
7. alloy surface: no dross, keep it clean, alloy crucible level of not less than one inch;
8. Cooling water pressure: Make sure the pressure is 3 ~ 5Kg / cm²;
9. Stands carrying water: Make sure the outlet temperature below 30 °C;
10. The zinc die casting feeding requirements: zinc raw material plus seventy percent; about 30 percent plus outlet material; high-end products full plus new material.

The above article from KENOS official website (http://www.kenos-diecasting.com/) kenosblog1508
The original address: http://www.kenos-diecasting.com/news_show_96.html, reproduced please specify.